We are updating the site. You can see all our products here.
the best industrial burner, boiler burner and furnace burner in the world
We are updating the site. You can see all our products here.
лучшая в мире промышленная и котельная горелка
RLGB-M-M-705-dual-fuel-elecrical-modular-mono-block-burner

RLGB-M/M-705

Power: 7000 (kW)

SKU: RLGBMM705

0.0/5

Technical Data

Technical Data
Value
Unit
Heat Rated Output
1000-7000 / 860-6023
(kW) / (Mcal/h)
NOx Class
II
—
Turn Down Ratio
1:7
—
G20 Gas Rated Output
1000-7000
kW
G20 Gas Flow Rate
100-700
m3/h
G25 Gas Rated Output
1000-7000
kW
G25 Gas Flow Rate
116-814
m3/h
LPG Rated Output
1000-7000
kW
LPG Gas Flow Rate
39-271
m3/h
Light Oil Rated Output
1400-7000
kW
Light Oil Flow Rate
118-590
kg/h
Heavy Oil Rated Output
—
kW
Heavy Oil Flow Rate
—
kg/h
Gas Line Pressure (Low pressure)
218-360
mbar
Gas Line Pressure (High Pressure type)
2-4
bar
Input Gas Pipe Size (Low Pressure)
DN80
—
Input Gas Pipe Size (High Pressure)
DN80
—
Electric Power Supply Phase
3
ph
Electric Power Supply Frequency
50
Hz
Electric Power Supply Voltage
380-400
V
Fan Electrical Motor Power
18.5
kW
Fan Motor Speed
2840
rpm
Pump Model
TA5
—
Pump Motor Power
1.5
kW
Pump Motor Speed
2850
rpm
Gas Operation Mode
Electrical Modular
Lamtec
Oil Operation Mode
Electrical Modular
Lamtec
Centrifugal Fan
550x117x42
mm
IP (With reference to ISIRI 2868)
43
—
Total Dimension
1886x1370x960
mm
Weight
462
Kg
{{ reviewsTotal }}{{ options.labels.singularReviewCountLabel }}
{{ reviewsTotal }}{{ options.labels.pluralReviewCountLabel }}
{{ options.labels.newReviewButton }}
{{ userData.canReview.message }}

Burner Type L1 L2 L3 H1 H2 D1 D2 D3 D4 N N1 N2 B.C.D B.C.D1 B.C.D2
RLGB-M/M-705
1683
514
1249
741
413
328
20
4
490

Gas Operation
Nox (mg/kW.h)
CO (ppm)
80
20
Light Oil Operation
Nox (mg/kW.h)
CO (ppm)
170
30

Gas Operation

Nox (mg/kW.h) CO (ppm)
80
20

Light Oil Operation

Nox (mg/kW.h) CO (ppm)
170
30

Proposal Form 3D
Download
Proposal Form
3D
Download

Related Products...

RLGB-M-110

RLGB-M-110

Read More
RGB-M-1250

RGB-M-1250

Read More
RLGB-M-205/LN

RLGB-M-205/LN

Read More
RGB-MC-130/LN

RGB-MC-130/LN

Read More
RLGB-MC-505/LN

RLGB-MC-505/LN

Read More
RGB-M-145

RGB-M-145

Read More
RLGB-M-385/LN

RLGB-M-385/LN

Read More
RLGB-M/M-1250

RLGB-M/M-1250

Read More
RGB-80

RGB-80

Read More
RGB-M-1550

RGB-M-1550

Read More

Useful Links

About Us

PACKMAN Company was established in February of 1975. This company started its official activity in the field of construction of High-Pressure Vessels such as Hot-Water Boilers, Steam Boilers, Pool Coil Tanks, Softeners and Heat Exchangers from 1984.

Click Me

Newsletter

Burner Selector
Product
MonoBlock Burner (MB Series)The burner works fully automatically, and does not require any permanent control. The connected regulation of heat output and low access of air during combustion ensure highly efficient operation. The burner is designed as a monoblock and thus the ventilator is a part of the burner’s main body.
Electrical Modular BurnersTechnical and Functional Features Highly efficient gas/oil burners for domestic and industrial application Compatible with all types of combustion chambers according to EN303 standard Designed for maximize efficiency and fuel cost savings Based on Iran national standard ISIRI-7595 and ISIRI 7594 (BS-EN676 and BS-EN267) for gas and oil fuel, respectively. Compact design with enclosed aluminum air housing High-quality with low-emissions combustion Sound proofing materials incorporated in the air suction circuit Full electronic modular operation with air/gas ratio control Ability of running with Variable Speed Drive (VSD) for reduction in noise level and increase the life expectancy of fan wheel motor. Ability of working with either of pressure based or Air/steam atomizers in dual fuel version. Ability of running with FGR technology for further reduction in NOx level (option) Light weight and optimized geometry Simple Installation, adjustment and maintenance Electrical Modular Operation Fossil fuel burners are often used as the principal medium for delivering energy to industrial furnaces and Boilers. Increasing focus on reducing energy costs has led manufacturers to concentrate on new burner design techniques and important advances in efficiency gains have been made over the years. As one of the most effective strategies are burner management and control systems.…
Dual Fuel BurnersElectrical Modular Monoblock Dual Fuel burner (RLGB-M Series) RLGB-M Series or RAADMAN Modulating dual fuel burners, covering a firing range from 700 to 17000 kW, are designed for a wide range of domestic and industrial applications. These Industrial burners have been tested and evaluated based on Iran national standard ISIRI-7595 (BS-EN 676) and ISIRI-7594 (BS-EN 267) for gas and oil operation respectively. According to performed experiments, the values of CO during low excess air operation is lower than 30 mg/kWh (in some cased very close to Zero). The precise design of their combustion head results a full gas-air mixture that guarantees high efficiency levels in all various applications. These Monoblock burners are equipped with LAMTEC and SIEMENS control system with capability of full air/gas ratio control throughout entire burner operating range as well as devices of well-known European companies such as Dungs, Kromschroder and Suntec. Burner superior design accompanied by high quality electronic devices have also resulted a further improvement in boiler’s performance in order to decrease fuel cost and emissions. RLGB-M Series Firing Ranges RLGB-M Series Technical Data N.G operation: Electrical Modular LFO operation: II or III Stage Electrical Full Modular Monoblock Dual Fuel Burner (RLGB-M/M Series) RLGB-M/M Series…
Gas BurnersElectrical Modular Monoblock Gas Burners (RGB-M Series) RGB-M Series or RAADMAN Electrical Modular Monoblock  gas burners, covering a firing range from 160 to 17000 kW, are designed for a wide range of domestic and industrial applications. All RAADMAN modular burners are equipped with LAMTEC or SIEMENS electronic control system with capability of full air/gas ratio control throughout entire burner operating range. These burners have been tested and evaluated based on Iran national standard ISIRI-7595 (BS-EN 676). According to performed experiments, the values of CO even in low excess air operation is lower than 30 mg/kWh (In some cases, values close to zero have also been reported). The precise design of combustion head results a full gas-air mixture that guarantees high efficiency levels in all various applications. Burner superior design accompanied by high quality electronic devices have also resulted a further improvement in boiler’s performance in order to decrease the fuel cost and emissions. Gas Burners (RGB-M Series) Firing Ranges RGB-M Series Technical Data N.G Operation: Electrical Modular Gas Train Diagram GT1 (Pressure input
Multi Fuel Burners
Mechanical Modular Burners
Dual Fuel Burners
Gas Burners
Multi Fuel Burners
Staging Burners
Dual Fuel Burners
Gas Burners
Multi Fuel Burners
Dual Block Burners (DB Series)
Electrical Modular Dual Fuel Burners
Electrical Modular Gas Burners
Electrical Modular Multi Fuel Burners
Premixed BurnersCondensing boilers are water heaters fueled by gas or oil. They achieve high efficiency (typically greater than 90% on the higher heating value) by condensing water vapour in the exhaust gases and so recovering its latent heat of vaporisation, which would otherwise have been wasted. n a conventional boiler, fuel is burned and the hot gases produced pass through a heat exchanger where much of their heat is transferred to water, thus raising the water’s temperature. One of the hot gases produced in the combustion process is water vapour (steam), which arises from burning the hydrogen content of the fuel. A condensing boiler extracts additional heat from the waste gases by condensing this water vapour to liquid water, thus recovering its latent heat of vaporization. A typical increase of efficiency can be as much as 10-12%.[citation needed] While the effectiveness of the condensing process varies depending on the temperature of the water returning to the boiler, it is always at least as efficient as a non-condensing boiler. (Read More)
PE Series
PM Series (Post Mixed Burners)
Furnace Burner
Fire Heater Burner
Water Tube BurnerWater Tube Boilers The ability of water tube boilers to be designed without the use of excessively large and thick-walled pressure vessels makes these boilers particularly attractive in applications that require dry, high-pressure, high-energy steam, including steam turbine power generation. Owing to their superb working properties, the use of water tube boilers is highly preferred in the following major areas: Variety of process applications in industries Chemical processing divisions Pulp and Paper manufacturing plants Refining units Power Plants Besides, they are frequently employed in power generation plants where large quantities of steam (ranging up to 500 kg/s) having high pressures i.e. approximately 16 megapascals (160 bar) and high temperatures reaching up to 550°C are generally required. A water tube boiler can be defined as a Steam boiler in which the flow of water in the tubes, as well as hot gases, enclose the tubes. Not like fire tube boilers, this boiler attains high-pressures, as well as high-steam capabilities, can be achieved. This is because of condensed tangential pressure on tubes which is known as hoop stress.
Multi Flame Burner
Single Flame Burner
Clean Combustion
Hydrogen Burners (H2 Ready)
Low NOx Burner
Burners Ventilation Systems (BVS-Series)
Backward Ventilation System
Forward Ventilation System
Heavy Oil Heater (OH Series)
Electrical Oil Heater
Steam Used Oil Heater
Academy
Catalogues
Our Services
About US
Contact Us
Login
Icon-contact Icon-clipboard11 Icon-phone